![]() ![]() When patching microphones through a patchbay that are being supplied phantom power from a mixing board, patching a mic can damage the console or mic if the grounds are not strapped on the Patchbay! As the patch cable plug is inserted into the Patchbay, the tip of the plug will momentarily connect with the ring contact in the socket, while the ring of the plug touches the sleeve contact. ![]() However, if you use a large format console with one-button that turns on the phantom power for all channels you will need to strap the grounds together on the patchbay channels you want to phantom-power. bother you.Ĭan I run my phantom-powered microphone signal through my patchbay? However, you will need to leave around four patchbay channels unused between the digital signals and the analog signals to prevent cross-talk from the digital signals that would well. According to ADC, if you run your digital signal though your analog patchbay, you just used 100 of your three-hundred feet.Ĭan I run my digital audio and analog audio through my analog patchbay? Remember your AES/EBU signal can travel a total length of 300 feet. ![]() Can I run my digital audio AES/EBU signal through my analog patchbay?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |